How do you set up an indoor trike trainer?
Lift the back of the trike, slide the trainer under, spin the wheel, lock your brakes. No tools. Here's the rest of what's worth knowing.

So what you do is you lift up the back of your trike a few inches and you slide the trainer under there and let the back tire kinda drop down in between the two drums, and then you give the wheel a little spin with your hand and lock your front brakes and you're riding. That's really it. There's no tools and you don't have to mess with your skewer and there's nothing to put together, it comes out of the box that way.
Which trainer for which trike
If you've got a tadpole with two wheels up front you just need the one trainer, the OverDrive 2, or the Double OverDrive 2 if you like it hard. Delta trike? If only one back wheel's driven, one trainer and a block does it. Both back wheels driven, that's the TWD210 set. Handcycle folks, you put our Handcycle Adapter 2 on an OverDrive 2. Anything from a 16 inch wheel up to 700c fits.
Don't just take my word for it
Bryan Ball over at BentRider Online put it about as simple as you can when he wrote "Just take it out of the box and place it under your back wheel like the photos show." And back in 2022 I did a little video on this riding a trike on the trainer, and here's what I said, straight off the video: "if for any reason that you don't want to go out and ride maybe it's raining, snowing, maybe you just want to get a good little 15 20 30 minute ride in your house or in your garage and all you need to do is take the SportCrafters trainer lift up your rear wheel put it under the wheel and get on your trike and start pedaling and then also you can shift still." Yep, that's still how it works.
Where to put it
Garage, spare room, back patio, all good. Carpet, nah, those fibers get sucked right up in the drums. Red cap drum goes toward the back of the trike, that's where the magnets are. Delta that drives one back wheel? Block under the other back wheel so you sit level. Noise wise, Bryan Ball said it does make some, "but not enough to stop your spouse from watching television in the next room." Ha, so there you go.
That little rocking
Nothing's clamping your trike down so yeah, it'll rock a touch front to back, lock your brakes hard and pedal round circles and it mostly goes away. Now if you're riding after a brain injury, that motion can bug some folks, and honestly a clamp style trainer might be better for you. Rather tell you now than after.
Harder or easier
You never touch the trainer, you just shift. Shift up and it gets harder, shift down and it eases off, because those magnets add resistance the faster you go, same as out on the road. Way easier? Lift the trike off, spin the trainer around, roll back on. Light easy spin. Real handy when the whole family's taking turns on one trainer.
Putting it away

You lift the wheel off and grab the handle and carry it to the closet, that's it. It's got eight rubber pads under it, four a side, so it doesn't walk around on you while you ride and it won't scratch the floor. Damp rag after, no cleaner. Bolts snug, don't crank 'em. Sealed bearings, so nothing to grease.
And my favorite quote
I'll leave you with my favorite one, from Brian Zupke over at Recumbent & Tandem Rider Magazine, because he nailed it: "I have tested a few different trainers for trikes and bikes. The [OverDrive trainer]... is hands down my favorite. Unfortunately, if there happens to be an actual hurricane, ice storm, cook-eggs-on-the-sidewalk heat wave, alien invasion, or plague of biblical-proportions happening outside, the [OverDrive trainer] will take away any excuse you might have to skip your ride. Sorry."