Straight answers to the questions trike and handcycle riders ask us most.
Jump to: Choosing a trainer · Upgrading from an older SportCrafters trainer · For dealers · Tadpole trikes (two wheels in front) · Delta trikes (two wheels in back) · Recumbent handcycles · Setup and riding · Buying, shipping and support
Choosing a trainer
Which trainer fits my trike or handcycle?
It depends on what you ride: a tadpole trike, a delta trike, a delta with a rear differential, or a recumbent handcycle. Our guide Which trainer fits my trike? walks through each one. Still not sure? Email support@sportcrafters.com with your make and model, and we'll tell you exactly what you need.
OverDrive 2 or Double OverDrive 2?
At low speeds the two feel about the same. The Double OverDrive 2 has two resistance drums and pushes back much harder at higher speeds, so it suits strong riders doing hard intervals on a trike with 21 or more gears. The OverDrive 2 gives plenty of resistance for staying in shape and costs less. Most riders pick the OverDrive 2.
Which model replaced my old SportCrafters trainer?
- MR100 or MR110: now the OverDrive 2 (MR210)
- MR120: now the Double OverDrive 2 (MR220)
- TWD110: now the TWD210
- HCT110 handcycle trainer: now an OverDrive 2 with the Handcycle Adapter 2 (HCT2)
The new frame is sturdier and rides the same.
Does it work with my TerraTrike, Greenspeed, Catrike or ICE trike?
Yes. Our trike trainers work with tadpole trikes and delta trikes, with any rear wheel from 16 in up to 700c, and nothing clamps to your rear axle. That covers the standard models from the major trike makers, including:
- TerraTrike
- Greenspeed
- Catrike
- ICE (Inspired Cycle Engineering)
- AZUB
- HP Velotechnik
- Steintrikes
- Sun Seeker
- Performer
- HASE
- Trident
What matters is your rear wheel size and whether your trike drives one rear wheel or both, not the brand.
Delta trike? If it drives one rear wheel, put an OverDrive 2 (MR210) or Double OverDrive 2 (MR220) under that wheel and a riser block under the other rear wheel. A second riser block under the front wheel levels the trike, if you like. The Delta Trike Kit includes the trainer and both riser blocks. If it has a rear differential and drives both rear wheels, you need the TWD210, a trainer under each wheel. How to tell which one you have.
Our trainers aren't made for two-wheel recumbent bikes. Not sure about your trike? Email support@sportcrafters.com with its make and model.
I'm new to triking or I have a disability. Will this work for me?
Usually, yes. Tell us how strong your legs are and what pedals you use. Pedals with straps and heel cups help keep feet in place if your legs are weaker.
Your trike isn't locked down on the trainer, so you'll feel a gentle rocking as you pedal. If that would bother you, for example after a brain injury, a clamp-style stationary trainer may suit you better. Email support@sportcrafters.com and we'll help you decide.
Trike trainer or stationary recumbent bike: which is better?
If you already own a trike, a trainer lets you ride it indoors with the same seat, fit and gears you ride outside. There's no second machine to buy or find room for. When you're done, lift the wheel off and carry the trainer to a closet by its handles.
Will it fit a 26-inch or 700c rear wheel?
Yes. Any rear wheel from 16 in up to 700c fits, so 20-inch, 24-inch, 26-inch and 700c trike wheels all work.
Can I use it with a quad (four-wheel) cycle?
A quad that drives both rear wheels through a differential uses the TWD210, with an OverDrive 2 under each rear wheel, the same as a two-wheel-drive delta trike. For any other quad, email us a photo of the back end first at support@sportcrafters.com.
Upgrading from an older SportCrafters trainer
Can I still buy an MR110 or MR120?
No. The OverDrive 2 (MR210) replaced the MR110, and the Double OverDrive 2 (MR220) replaced the MR120. The older models aren't sold anymore.
Does the OverDrive 2 ride differently from my old OverDrive?
No. It keeps the same rollers and resistance, with a new, sturdier frame.
Is my older SportCrafters trainer still under warranty?
Yes. Your lifetime warranty is still honored. Send us your model, about when you bought it, a photo and your question with the older product form, and we'll take it from there.
I have an original OverDrive (MR110). Can I turn it into a handcycle trainer?
No. The Handcycle Adapter 2 (HCT2) fits the OverDrive 2 (MR210) or Double OverDrive 2 (MR220) only, not the MR110. To ride your handcycle indoors, get the adapter and an OverDrive 2 together.
For dealers
We already carry SportCrafters. Do we need to apply again?
Yes. Every dealer fills out the one-time application on the SportCrafters dealer page, including shops that already carry SportCrafters. That sets up your account correctly in the new store.
Can dealers order online?
Yes. Once you're approved, log in to see your dealer pricing and add every trainer you need to your cart in one step.
Is there a quantity price for dealers?
Yes. Order any 6 or more trainers, in any mix, and you get a lower dealer price per unit, shown when you're logged in. On US orders of 6 or more trike trainers, we also take 60% off our actual shipping cost.
Do you have a minimum advertised price (MAP) policy?
Yes. Read the SportCrafters MAP policy.
Tadpole trikes (two wheels in front)
Will it fit my tadpole trike?
Yes. A tadpole trike has one rear drive wheel, so you need one trainer. Back the rear wheel onto the drums and ride. Your front wheels rest on the floor. Rear wheels from 16 in up to 700c fit.
Do I need blocks under my front wheels?
Usually not. You already sit reclined, so tilting back a little more doesn't feel odd. If you'd like the trike level, put a riser block under each front wheel. We sell the Elite Su-sta Adjustable Riser Block.
Can I use my fat-tire trike?
We don't recommend fat tires on the trainer. Tires up to 3 in wide fit fine. Smooth tires at maximum pressure ride best, and knobby treads are noisier.
My full-suspension trike still rocks. What can I do?
The rear suspension is the most likely cause. Lock it out if your trike lets you.
Delta trikes (two wheels in back)
How do I know if my delta trike drives one rear wheel or both?
- Lift one rear wheel off the ground and spin it backward by hand. Watch the pedals.
- Do the same with the other rear wheel.
- If the pedals turn with only one wheel, that's your drive wheel, and your trike is one-wheel drive. If they turn with either wheel, it drives both wheels through a differential.
Spin the wheel backward because the freewheel lets it spin forward without moving the pedals.
My delta trike drives one wheel. What do I need?
One OverDrive 2 under the drive wheel, plus a riser block under the other rear wheel. A second riser block under the front wheel levels the trike, if you like. The Delta Trike Kit includes the trainer and both riser blocks. Most delta trikes drive one wheel.
My delta trike drives both rear wheels. What do I need?
The TWD210: an OverDrive 2 under each rear wheel, with the two-wheel-drive adapter kit. Each wheel gets the same load, so the differential doesn't act as if you're turning. Two-wheel-drive delta trikes are rare and usually high-end.
Will 20-inch delta wheels work?
Yes. Keep the tires at maximum pressure so starting up doesn't feel heavy.
Can I use my e-assist motor on the trainer?
Yes. If it feels too hard, using the motor is fine as long as you're pedaling too.
Recumbent handcycles
Will it fit my handcycle?
Fits: recumbent-style handcycles whose footrests are attached to the fork and reach out ahead of the front axle.
Doesn't fit: upright or kneeling handcycles with footrests on the main frame, or handcycle attachments for wheelchairs.
Can I use a regular trike trainer with my handcycle?
Not by itself. A handcycle needs the Handcycle Adapter 2 (HCT2) bolted onto an OverDrive 2 (MR210) or Double OverDrive 2 (MR220).
What do the adapter's upright poles do?
They're required. They touch your footrests just ahead of the steering line and gently keep the handcycle pointed straight while you ride.
Do I have to take my footrests off?
No. Your footrests stay on, so you train in your normal riding position.
Where are the assembly instructions for the Handcycle Adapter 2?
The HCT2 manual is a PDF on our Manuals page. Need help? Email support@sportcrafters.com.
Do you make a wheelchair trainer?
No. Our trainers aren't designed for wheelchair training.
Setup and riding
What wheel sizes fit?
Any rear wheel from 16 in up to 700c. Very small wheels add a tiny bit of drag, but you won't notice it.
How wide a tire will fit?
Tires up to 3 in wide fit fine. We don't recommend fat tires on the trainer. The part of the tire touching the drums is narrower than its listed width. Once set up, the trike doesn't drift side to side.
What tire pressure should I use?
The maximum pressure printed on your tire's sidewall. Low pressure adds a lot of drag, especially at low speed. This is our number one tip.
Which way does the red cap go?
Toward the back of the trike. The red-capped drum holds the ARC magnets, and facing it back gives you full resistance. For a lighter spin, lift the trike off, turn the trainer around so the red cap faces the front, and roll back on. Below about 10 mph both ways feel about the same. The difference shows up as you go faster.
How do I center the wheel on the trainer?
Lift the back of your trike a few inches, slide the trainer under, and let the tire settle down between the two drums. Give the wheel a spin by hand. It should turn freely and stay in the middle. Once it's set, the trike doesn't drift side to side.
Why is it hard to get going unless I'm in my lowest gear?
At low speed, most of the drag comes from the tire, not the magnets. Pump your tire to the maximum pressure printed on the sidewall, start in a low gear, and shift up as you pick up speed.
It's too hard for me. What can I do?
- Shift to your lowest gear.
- Pump the tire to maximum pressure.
- Turn the trainer around so the red cap faces the other way. That gives you a lighter, steady spin from the same trainer, so everyone in the house can ride.
How does the resistance work? Is there a knob?
No knob. Our ARC Technology puts magnets inside the drum that move closer to the drum wall as you go faster. The faster you pedal, the more it pushes back, like a real road. Want it harder? Shift up. Easier? Shift down, or turn the trainer around so the red cap faces the other way. There's no fluid to leak. How ARC resistance works
Why does my trike rock back and forth?
Your trike isn't clamped down. When you push the pedals without pulling through the bottom of the stroke, your body presses back into the seat, which makes a gentle surge. To calm it:
- Set your parking brakes firmly. If they don't hold well, a short velcro strap around the brake levers works.
- Pedal with a smooth, round stroke.
- Use clip-in pedals, or pedals with straps and heel cups.
Most riders don't mind the slight motion.
Will it wear out my tires?
No more than riding does. Clamp-style trainers press a small roller hard into the tire. Ours work like a small set of bike rollers, which are easy on tires. Ride a few miles outside on brand-new tires first, because their slick coating can rub off on the drums.
Is it noisy?
With smooth tires, no. Knobby tires make a medium hum, so in an apartment we suggest smoother tires. A tire that's cold from the garage can squeak a little until it warms up. More air pressure helps.
Can I track my speed and distance?
Yes. Put a regular wheel-mounted bike computer on the wheel that sits on the trainer. Wireless is easier on a trike than a wired one. Sensors mounted on the trainer itself don't work, because the small drums spin too fast for them.
Can I use it with Zwift or a training app?
Our trainers don't measure power and don't connect to apps by themselves. A wheel speed sensor on the wheel that sits on the trainer tracks your speed and distance. Apps like Zwift work best with a power reading, so for those you'd need a power meter on your trike.
Can I use it on carpet?
It's best on a flat, hard floor, like a garage, a spare room or a patio. Carpet fibers can get pulled into the drums.
My trainer wobbles on the floor. How do I fix it?
If it rocks on a flat floor after shipping, one of the rigid feet is a little low. Set the trainer on the corner of a table and press the low feet down. That usually fixes it.
Does it need oil or maintenance?
No. The bearings are sealed and greased, so there's nothing to oil. After riding, wipe the drums and frame with a damp cloth, with no cleaners. Keep the bolts snug, not over-tight.
Buying, shipping and support
Where do you ship, and where do orders ship from?
We ship from the U.S. to all 50 states and to Europe. Your shipping cost shows on each product and in your cart before checkout. Order 6 or more trike trainers and we take 60% off our actual shipping cost (US orders only). We also ship to Europe by UPS at our actual cost, with no discount: $70.71 for the adapter or $78.42 for one trainer, added at checkout. For bigger Europe orders, email support@sportcrafters.com for a quote. One combined box usually costs much less per trainer. Europe orders: duties, tariffs and other import fees are paid by the buyer. For US territories, APO and FPO addresses, or anywhere else, email us for a quote.
Do you ship to the UK?
Yes. The UK is part of our Europe shipping, sent by UPS at our actual cost and added at checkout. Duties, tariffs and other import fees are paid by the buyer.
Do you ship to Canada or Australia?
Yes, by quote. Email support@sportcrafters.com with what you'd like and your address, and we'll send you the shipping cost before you order.
What does the warranty cover?
Every SportCrafters trainer, new or older, has a lifetime warranty. It covers manufacturer defects, not damage from abuse or misuse. The SportCrafters lifetime warranty page explains how to get support.
What does "Pre-order" mean on a product page?
When a product's button reads Pre-order, the page shows the date it ships by. You pay in full when you place the order, and we ship it by that date.
You can cancel a pre-order for a full refund any time before it ships. If the ships-by date changes, we'll email you the new date, and you can keep your order or cancel it.
Do you still sell the Omnium or bike rollers?
No. SportCrafters now makes trainers for trikes and handcycles only. Riding a two-wheel bike? The Omnium portable bike trainer is sold by Feedback Sports.
I have an older SportCrafters product. Where do I find parts or a manual?
Manuals for older SportCrafters trainers are on our legacy products page. For parts or any question, email support@sportcrafters.com.
How can my shop become a SportCrafters dealer?
Fill out the one-time application on the SportCrafters dealer page. Once you're approved, you can log in to see dealer pricing and place orders online. Dealers outside the US should email support@sportcrafters.com.
How do I contact SportCrafters?
Email support@sportcrafters.com about anything, including older products, or use the form on our contact page. We answer by email.